TIMER PUSH WHEEL BASED DTM-XX3 Series

Send Inquiry

Product Code : Timer

Brand Name : TIMER

Product Description

DTM-XX2 Series

Low cost, Effective, Easy to use Pushwheel based Digital timer

Programmable ON Delay/Interval mode via DIP switch

Multiple Time Range: From 0.1 Sec. to 99 Hrs.

Time Setting via High Quality Push wheel switches

Universal supply voltage ranges from 90 To 270 VAC

2-Digits, Single Row Display

High Accuracy: 0.05% of Full scale (Repeat Accuracy: 0.01%)

Time base selection via DIP switches

Configuration at power on (To prevent unauthorized tampering)

Available in 2 Standard DIN sizes

DTM-2D
Series		Economical keyboard Counter
Display	Type	7 segment LED
	No. of Digits	4 Digits, Single Row
	LED Indication	Output Status ; Batch/AR Time
	Dimensions	Table no : 1
Input Specification
Start Input		Power On, Pulse (Edge Trigger),Front Start (Programmable)
Reset Input		Front Key & Rear Terminal (Potential free)
Accuracy		Setting : 0.05% of Full scale Repeat : 0.01%
Output Specification
No. Of Outputs		2
Output 1	Relay / SSR	Factory settings
	Relay Contact Rating	5 A @ 250V AC/30V DC resistive
	SSR	12 VDC @ 50mA
Output 2	Relay / SSR	Factory settings
	Relay Contact Rating	5 A @ 250V AC/30V DC resistive
	SSR	12 VDC @ 50mA
Configuration Parameters
Delay Modes		On Delay/Interval
Time Range		9.9 Sec ; 99 Sec
		9.9 Min ; 99 Min
		9.9 Hrs ; 99 Hrs
Timing Accuracy		0.05 % Full scale
Front Panel Reset		Enable only
Output 2 Configurable		Auxiliary Contact
General Specification
Supply Voltage		90 - 270 VAC/DC
Supply Voltage		24 VAC/DC (OPTIONAL)
Temperature	Operating	0 - 50°C
	Storage	-20° to 75°C
Humidity (Non-condensing)		95 % RH
		Weight